Randy,
You might try setting your scan at 300dpi, if you haven't tried that
already.
I use Text Bridge by Xerox and it seems to work well, after I figured
out how to use it. My first attempt ended up with the weather report in
the middle of an obituary.
Sam
Fred Finkbiner wrote:
Randy,
Your problem may be in your OCR software,if you are using the one that
came with your scanner it may not be very good.I use Text-Bridge and it
seems to read newspaper print OK,it will miss a few words but they all do
that.
Later.........Fred
===========================
At 08:05 PM 2/18/98 -0800, you wrote:
>I just purchased a Leo Plus 3 scanner yesterday and I am having trouble
>understanding how I can copy a page in it, like an obituary and then be
>able to copy, cut and paste the copy from the image to a website to make
>it a little easier and time saving. I understand how to scan but when I
>do the end result of a typed page is somewhat garbled. You can pick out
>words but some letters are incorrect or missing. Any thoughts on what
>could be wrong?
>
>Randy Klemme
>Franklin County
>
>
>