Marie Robinson wrote:
This may be a hard one to explain--along the bottom of the window
there are some fields or boxes for information from some of the program
fields. For instance, for me, on the left, it says:
For Help, press F1
next box the date of the highlighted tract shows
next box is empty
next box shows the information from the To field
next box is the area of the tract (sq ft)
next one empty
next shows NUM
What field would show up in the second box? I would really like to have the
"Typ" or "Id" field information show up there. Can I control that?
You are looking at the status bar and if you click on the Table View tab
(just above the "For Help, Press F1" message), you will see highlighted the
deed that is shown in the status bar. In the case of the 2nd field (empty
in your case for this deed), it is the From entity of the deed. The fifth
field (also empty in your case) and the sixth field (Num in your case)
show the status of the Insert (OVRwrite) and Num Lock keys. However, I do
not see that depressing the Insert key makes any difference in my
installation although I never use it much anyway.
You can find this under Status Bar when you press F1 to display the Help
Index. Note that the content of some of these fields change depending on
the View selected -- particularly the fourth field.
As far as I know there is no way to select what is display7ed in the Status
Bar fields except as noted above.
Hope this helps -
TMG Tips: <http://www.tmgtips.com>
My website: <http://www.tmgtips.com/lhoffman>
A user of the best genealogy program, The Master Genealogist (TMG)