My Deedmapper usually opens at 2000ft. (121.2p) in the "plot view". In the
"plot view" I continue to hit my "page down" button on the keyboard
the scale on the bottom/left of the screen show a scale of 31.7ft (1.92p).
Then in the "text view", I use the template, leaving all the information
empty until I get down to the "ln" entry, then I enter the following:
Ln e; 6f;
Ln s; 3f;
Ln w; 6f;
Ln n; 3f;
Now go to the plot view. Hold your mouse down and the plot should come to
Once you plat out one 3x6 ft. grave, you can copy and paste rather then
having to plat ever single grave.
Hope that works. Let me know if I can help in any way.
----- Original Message -----
From: "Jim Barrett" <parino(a)flash.net>
Sent: Thursday, July 21, 2005 3:15 PM
Subject: RE: [DMU] Cemetery Plots
I would like to know how you were able to set the scale that small.
When I tried to reduce the scale below 125 I got a message that the
scale was too small. I would like to be able to do a similar project
with w cemetery in Rutherford Co., TN.
From: Ed Adams [mailto:email@example.com]
Sent: Thursday, July 21, 2005 1:39 PM
Subject: Re: [DMU] Cemetery Plots
My wife and I platted out an old cemetery in West TN using DeedMapper.
was an old cemetery that dated back to the early history of the county
we were not able to find a deed to the cemetery; however, the cemetery
well defined as the public road completely encircled the cemetery. We
in on the cemetery with a DeedMapper map to the scale of 31.7f (1.92p).
==== DEED-MAPPER-USERS Mailing List ====
Send all messages and replies to <DEED-MAPPER-USERS-L(a)rootsweb.com>.
Census images 1901, 1891, 1881 and 1871, plus so much more.
Ancestry.com's United Kingdom & Ireland Collection. Learn more: